Image Source: i.ytimg.com
DIY: How To Make A Garden Hose Holder At Home Simply
Messy hoses can be a pain. They trip people. They look bad. They can even get damaged sitting on the ground. So, you need a way to keep your hose neat and tidy. Making a garden hose holder yourself is a great idea. You can save money. You can make it just right for your space. It is a simple project most people can do. It helps with DIY garden hose storage.
Why Build Your Own Hose Holder?
Keeping your garden tidy makes yard work easier. A hose laying around looks messy. It is also a danger. Someone can fall over it. The sun and weather can hurt the hose too. A holder fixes these issues. It keeps the hose coiled up nicely.
Making your own holder is smart.
* Save Money: Store-bought holders cost money. Making one from scrap wood or cheap pipes costs much less.
* Make It Right: You can build it to fit your exact hose size. You can make it fit your yard perfectly.
* Use Old Stuff: You can use materials you already have. This is good for the earth.
* Feel Good: Finishing a project yourself feels good.
This simple hose storage solution project is good for beginners. You do not need fancy tools. You do not need special skills. You can make something useful and nice-looking.
Types of Homemade Hose Holders
There are many ways to store a hose. You can make different kinds of holders at home.
* Wall Mount: These hang on a wall. Often near the water tap. They are good if you have a wall space free.
* Freestanding Stand: These sit on the ground. You can put them anywhere in your yard. Good if you have no wall nearby.
* Simple Hook: Just a basic hook on the wall. Easy to make.
* Hose Caddy: A stand with wheels. You can move the hose around easily.
* Hose Reel: A spinning drum you wind the hose onto. This can be simple or complex to build.
We will look at how to make a few types. This gives you ideas for your own outdoor hose organizer project. We will focus on easier ones first.
Picking Your DIY Project
Which project is best for you? Think about these things:
* Your Skill Level: Are you new to DIY? Start with something simple.
* Tools You Have: Do you have power tools? Or just hand tools?
* Where It Will Go: On a wall? In the middle of the yard?
* Your Hose Size: How long and heavy is your hose? A bigger hose needs a stronger holder.
* Materials You Have: Do you have wood pieces? Leftover pipes?
Based on this, you can choose a easy hose holder design.
Project 1: Simple Wooden Wall Mount
This is a very common type. It hangs on the side of your house or shed. It is quite easy to build. It provides DIY garden hose storage right where you need it. This uses Wooden hose hanger plans.
Materials Needed
You don’t need much wood. Some scrap pieces work well.
| Item | Amount | Why You Need It |
|---|---|---|
| Wood Board (thick) | About 1-2 feet | For the main holder arm |
| Wood Board (flat) | About 6×6 inches | For the mounting plate against the wall |
| Wood Screws | 8-10 screws | To join pieces and attach to wall |
| Wood Glue | Small bottle | Makes the joints stronger |
| Sandpaper | Small piece | To make wood smooth |
| Paint or Sealant | Small can | To protect wood from rain and sun (optional) |
Tools Needed
Basic tools are fine for this job.
| Tool | Why You Need It |
|---|---|
| Saw | To cut wood (hand saw or power saw) |
| Drill | To make holes and drive screws |
| Measuring Tape | To measure wood |
| Pencil | To mark cuts and screw spots |
| Screwdriver | To tighten screws (if not using a drill) |
| Safety Glasses | To protect your eyes (very important!) |
Steps to Build the Wooden Wall Mount
Here is how to make your Wall mount hose holder DIY. Follow these steps simply.
Cutting the Wood Pieces
- Take your thicker wood board.
- Measure it.
- Mark a line with your pencil. You need one piece about 10-12 inches long. This will be the arm sticking out.
- Cut along the line with your saw.
- Take your flat wood board.
- Measure it.
- Mark a square about 6×6 inches.
- Cut along the lines to make the mounting plate. This piece goes against the wall.
Shaping the Arm Piece
- The end of the arm piece needs a curve or angle. This helps the hose stay on.
- Mark a gentle curve or cut an angle on one end of the 10-12 inch piece.
- Use your saw to cut the shape.
- Sand all the cut edges smooth. This stops splinters. It also makes it look better.
Joining the Pieces Together
- Take the 6×6 inch flat piece (the mounting plate).
- Take the shaped 10-12 inch piece (the arm).
- Put the arm piece in the center of the flat piece. The cut end of the arm should stick out. The other end sits flat on the plate.
- Put some wood glue on the end of the arm piece that touches the plate.
- Put the arm piece back onto the plate.
- Hold them together.
- Drill holes through the flat plate into the arm piece. Drill 2-3 holes. Make sure the drill bit is smaller than your screws.
- Put screws into the holes. Tighten them with your drill or screwdriver. This joins the pieces firmly.
Attaching to the Wall
- Find a strong spot on your wall. A wall stud behind the siding is best. This is the strong wood frame of the wall.
- Use a stud finder if you have one. Or tap on the wall to hear where it sounds solid.
- Hold your hose holder against the wall where you want it. Make it level.
- Mark where you will put screws on the mounting plate. Use your pencil. Mark at least 4 spots. One near each corner of the plate is good.
- Drill holes through the mounting plate at your marks.
- Hold the holder back up to the wall. Line up the holes with the wall stud.
- Put your screws into the holes. Use long screws that go deep into the wall stud.
- Tighten the screws until the holder is held tightly against the wall. Make sure it does not wobble.
Finishing Touches
- Sand the whole holder again. Make it nice and smooth.
- Wipe off all dust.
- If you want, paint or seal the wood. This protects it from rain, sun, and bugs. It will last much longer.
- Let the paint or sealant dry completely.
Your Easy hose holder design is ready! You can now wind your hose onto the arm. This is a simple Homemade garden hose stand that hangs.
Project 2: PVC Freestanding Stand
This project uses PVC pipes. These are plastic pipes used for water. They are cheap and easy to work with. This project makes a stand that sits on the ground. It is an Outdoor hose organizer project that you can move. This is a PVC hose rack tutorial.
Materials Needed
PVC pipes are light but strong enough for a hose.
| Item | Amount | Why You Need It |
|---|---|---|
| PVC Pipe (1 inch) | About 10-15 feet | For the main structure |
| PVC Elbows (90°) | 6 pieces | To make corners |
| PVC Tees | 2 pieces | To make the base connection |
| PVC Caps (1 inch) | 4 pieces | To cover the ends of the legs (optional) |
| PVC Primer | Small can | Cleans pipe ends before gluing |
| PVC Cement | Small can | Glues pipes together (very strong) |
| Sandpaper | Small piece (fine grit) | To smooth edges (optional) |
| Spray Paint | Can (for plastic, optional) | To give it color |
Tools Needed
PVC is easy to cut.
| Tool | Why You Need It |
|---|---|
| PVC Pipe Cutter | Makes clean, easy cuts on PVC |
| Measuring Tape | To measure pipes |
| Marker | To mark cuts |
| Safety Glasses | To protect your eyes |
Steps to Build the PVC Stand
Let’s make a Homemade garden hose stand from PVC.
Cutting the PVC Pipe
- Measure and mark your PVC pipe. You will need these pieces:
- Two pieces about 30 inches long (Uprights)
- Two pieces about 12 inches long (Base sides)
- One piece about 10 inches long (Top arm)
- Four pieces about 6 inches long (Legs)
- Use your PVC pipe cutter to cut the pipes neatly at the marks. A good cutter makes this very easy.
- Make sure all cuts are straight.
Assembling the Base
- Take the two 12-inch pieces (Base sides).
- Take the two Tee pieces. The Tees have three openings.
- Put one 12-inch piece into the side opening of a Tee.
- Put the other 12-inch piece into the side opening of the second Tee.
- Now you have two Tee pieces connected by a 12-inch pipe. The middle opening of each Tee should point up.
- Take the four 6-inch pieces (Legs).
- Put some PVC primer on the ends of one leg piece. Also put primer inside one opening of a 90° elbow.
- Put PVC cement on the same ends.
- Quickly push the leg piece into the elbow. Give it a little twist. Hold for a few seconds.
- Do this for all four legs and four elbows. You now have four leg pieces with an elbow on one end.
- Now, take the base assembly (the two Tees and the 12-inch piece).
- Put primer and cement on the other end of the 6-inch leg pieces.
- Put primer and cement inside the side openings of the two Tee pieces.
- Push two leg pieces into the side openings of one Tee. The elbows should face outwards.
- Push the other two leg pieces into the side openings of the second Tee. The elbows should face outwards.
- You now have the main base with four legs sticking out sideways.
Building the Uprights and Arm
- Take the two 30-inch pieces (Uprights).
- Put primer and cement on one end of each upright.
- Put primer and cement inside the two upward-facing openings of the Tee pieces in the base.
- Push the uprights into the Tee openings. Make sure they stand straight up.
- Take the remaining two 90° elbows.
- Put primer and cement on the top end of each upright.
- Put primer and cement inside one opening of the two remaining elbows.
- Push the elbows onto the top of the uprights. Make the elbows point towards each other.
- Take the 10-inch piece (Top arm).
- Put primer and cement on both ends of the top arm piece.
- Put primer and cement inside the open ends of the two elbows on top of the uprights.
- Push the top arm piece into the elbows. Make sure the whole top section is straight and level.
Finishing and Optional Steps
- Let the PVC cement dry completely. This takes some time to get full strength. Check the can for drying times.
- You can add PVC caps to the ends of the legs (the elbows). This gives it a cleaner look and protects the pipe ends. Use primer and cement to attach them.
- If you want, you can lightly sand the PVC to help paint stick.
- Spray paint the entire stand with paint meant for plastic. Choose a color you like!
- Let the paint dry completely.
Your PVC hose rack tutorial project is done! This Simple hose storage solution sits on the ground. You can coil your hose around the top arm and the uprights.
Project 3: Upcycled Simple Hook
This is perhaps the easiest Easy hose holder design. You use something old to make a new hook. It’s a great way to create Simple hose storage solution.
Materials & Tools
- A strong, curved item you no longer need. Ideas:
- An old, large metal hook (like a coat hook)
- A sturdy piece of metal rebar bent into a curve
- A large, thick tree branch with a good bend
- An old, strong bike handlebar or frame piece
- Screws or bolts (if attaching to wood or wall)
- Post (if sticking in the ground)
- Tools to attach it (drill, screwdriver, hammer, wrench, post hole digger)
Steps to Make an Upcycled Hook
Prepare Your Item
- Find a strong item with a good curve. Make sure it can hold the weight of your hose.
- Clean it if needed. Remove rust or loose bark.
- If it needs bending, use tools to bend it safely. Be careful!
Choose How to Mount It
- Wall Mount: Find a strong wall spot (a stud). You need a flat area or a way to make the hook flat against the wall. You might need a small piece of wood as a base plate.
- Ground Stake: Get a strong post (wood or metal). You will attach the hook to the top of this post. Then stick the post in the ground.
Attaching the Hook
- For Wall Mount:
- If your hook has a flat base, great. If not, attach it to a small wood piece first. Use screws or bolts.
- Hold the hook (or the wood piece with the hook) against the wall stud.
- Mark screw holes.
- Drill pilot holes if needed.
- Screw the hook firmly to the wall. Make sure it is very secure.
- For Ground Stake:
- Attach the hook to the top of your post. Use screws or bolts. Make sure it is very strong. It must hold the hose weight plus force when you put the hose on.
- Dig a hole in the ground where you want the stand. Make it deep enough for the post to be stable. About 1-2 feet deep is good.
- Put the post in the hole.
- Fill the hole with dirt or concrete for extra strength.
- Pack the dirt down tightly around the post.
- Wait for concrete to dry if you used it.
Finishing
- You can paint metal to prevent rust. Paint wood to protect it.
- Make sure there are no sharp edges that could hurt the hose. Sand them down.
This is a very basic Homemade garden hose stand or wall hook. It shows how you can reuse things.
Advanced Concepts: Reels and Caddies
You can also try to Build a hose reel or Constructing a hose caddy. These are more complex.
- Hose Reel: This involves building a frame and a spinning drum. You need to think about how the water gets from the tap through the spinning part to the hose. This needs more parts and building skill.
- Hose Caddy: This is like the PVC stand but with wheels added to the base. You need a strong frame and wheels that can handle the weight. You might also add a handle to push or pull it.
These projects are more involved than the simple hangers or stands. They might be your next step after trying an easier one.
Making Your Holder Last
Once you make your holder, you want it to last.
* Protect Wood: If you made a wooden holder, paint or seal it well. Use outdoor paint or a good waterproof sealant. Do this often, like once a year. This stops water damage and rot.
* Protect Metal: If you used metal, paint it to stop rust. Use a metal primer first.
* Placement: Think about where you put it. Keep wooden holders out of constant wet spots if possible.
* Check It: Look at your holder now and then. Make sure screws are tight. Check for cracks in wood or PVC. Fix small problems before they get big.
Taking care of your DIY garden hose storage makes it work for a long time.
Staying Safe While You Build
Working with tools can be fun but you must be safe.
* Wear Safety Glasses: Always wear them when cutting or drilling. Small pieces can fly out.
* Read Tool Manuals: Know how to use your tools before you start.
* Work in a Good Space: Have lots of light and room. No tripping hazards.
* Be Careful with Cuts: Saws and cutters are sharp. Keep fingers away from the blades.
* Watch for Fumes: If using glue, paint, or sealant, work in a place with fresh air.
* Get Help: If a step is hard or needs holding, ask someone to help you.
Safety is the most important part of any Outdoor hose organizer project.
Fixing Problems
Sometimes things do not go perfectly.
* Holder is Wobbly:
* If wall mount: Check if screws are in a stud. Use longer screws. Add more screws.
* If freestanding: Make the base wider. Make the legs longer. Use glue with screws or cement with PVC. Make sure the base is on flat ground.
* Wood Splits When Screwing:
* You might need to drill a pilot hole first. Make the hole a bit smaller than the screw width.
* Do not overtighten screws in wood.
* PVC Joint Leaks (for water-carrying parts – not an issue with these designs):
* For these simple holder designs, leaks are not a problem as no water flows through.
* If building a reel that moves water, leaks mean the primer and cement were not used right or did not dry. You might need to cut out the bad joint and replace it.
* Hose Slips Off:
* Make the arm longer.
* Angle the arm up more.
* Add a lip or hook at the end of the arm.
Most problems have simple fixes. Do not get mad. Just think about the cause.
FAQs
Can I make a hose holder from old tires?
Yes, you can! People use old tires in many ways in the garden. You could stack them to make a base or cut a tire to use as a large hook. Be creative! This is another form of DIY garden hose storage.
How much weight can a simple wooden holder hold?
A simple wooden holder screwed properly into a wall stud can hold a lot of weight. A 50 or 100-foot garden hose is usually fine. Make sure the wood is thick enough and the screws are long and strong.
Do I need to use glue with the screws on the wooden holder?
Using wood glue with screws makes the joint much stronger. It helps stop the joint from wiggling loose over time. It is a good step to take for a stronger holder.
What size PVC pipe is best?
1-inch PVC pipe is a good size for a hose stand. It is strong enough but not too bulky or expensive. You could use larger pipe (like 1.5 inch) for a bigger, heavier hose if you want.
How high should a wall mount holder be?
Put it at a height that is easy for you to wind the hose. Not too high that you cannot reach, not too low that the hose drags on the ground. Eye level or a little lower is often good.
Can I make a hose holder from metal pipes instead of PVC?
Yes, you can use metal pipes (like galvanized pipe or copper pipe) to make a stand or wall mount. Metal is stronger but harder to cut and join than PVC. You usually need pipe threading tools or welding for metal. PVC is easier for most DIYers.
How long will these homemade holders last?
If you use good materials and protect them from the weather (like sealing wood or painting metal/PVC), they can last for many years. PVC is very durable outdoors. Wood needs regular care.
Wrapping It Up
Making your own garden hose holder is a useful project. It is good for your yard. It helps keep things tidy and safe. You can choose the project that fits your skills and tools.
We looked at a simple wooden Wall mount hose holder DIY. We also covered a PVC Homemade garden hose stand. We talked about using old items for a Simple hose storage solution. We even touched on building a Build a hose reel or Constructing a hose caddy.
These projects use basic steps. They help you make your garden a better place. Pick a project. Gather your simple tools and materials. And start building! You will have a tidy yard in no time. Your Outdoor hose organizer project will be a success.